|
| int | rotating_cone.domain_size = 2 |
| |
| | rotating_cone.model_part = ModelPart("FluidPart") |
| |
| | rotating_cone.SolverSettings = ProjectParameters.SolverSettings2 |
| |
| | rotating_cone.solver_constructor = __import__(SolverSettings.solver_type) |
| |
| string | rotating_cone.input_file_name = "square" |
| |
| | rotating_cone.gid_mode = GiDPostMode.GiD_PostBinary |
| |
| | rotating_cone.multifile = MultiFileFlag.MultipleFiles |
| |
| | rotating_cone.deformed_mesh_flag = WriteDeformedMeshFlag.WriteUndeformed |
| |
| | rotating_cone.write_conditions = WriteConditionsFlag.WriteElementsOnly |
| |
| | rotating_cone.gid_io = GidIO(input_file_name, gid_mode, multifile, deformed_mesh_flag, write_conditions) |
| |
| | rotating_cone.model_part_io_fluid = ModelPartIO(input_file_name) |
| |
| float | rotating_cone.mesh_name = 0.0 |
| |
| | rotating_cone.conv_diff_solver = solver_constructor.CreateSolver(model_part, SolverSettings) |
| |
| float | rotating_cone.conductivity = 0.0 |
| |
| float | rotating_cone.density = 1.0; |
| |
| float | rotating_cone.specific_heat = 1.0; |
| |
| | rotating_cone.vel = Vector(3); |
| |
| float | rotating_cone.xc = 1.00 / 6.00 |
| |
| float | rotating_cone.yc = 1.00 / 6.00 |
| |
| float | rotating_cone.sigma = 0.2 |
| |
| tuple | rotating_cone.X1 = (node.X - xc) / sigma |
| |
| tuple | rotating_cone.X2 = (node.Y - yc) / sigma |
| |
| float | rotating_cone.temp = 0.25 * (1.00 + math.cos(math.pi * X1)) * (1.00+math.cos(math.pi*X2)) |
| |
| | rotating_cone.Dt = ProjectParameters.Dt |
| |
| | rotating_cone.full_Dt = Dt |
| |
| float | rotating_cone.initial_Dt = 0.01 * full_Dt |
| |
| | rotating_cone.Nsteps = ProjectParameters.nsteps |
| |
| | rotating_cone.final_time = ProjectParameters.max_time |
| |
| | rotating_cone.output_time = ProjectParameters.output_time |
| |
| | rotating_cone.output_step = ProjectParameters.output_step |
| |
| | rotating_cone.time = ProjectParameters.Start_time |
| |
| int | rotating_cone.out = 0 |
| |
| int | rotating_cone.step = 0 |
| |
