|
| int | example_script.domain_size = 2 |
| |
| | example_script.Qcomp_model_part = ModelPart("pFluidPart"); |
| |
| | example_script.input_file_name = fluid_ulf_var.problem_name |
| |
| | example_script.gid_mode = GiDPostMode.GiD_PostBinary |
| |
| | example_script.multifile = MultiFileFlag.MultipleFiles |
| |
| | example_script.deformed_mesh_flag = WriteDeformedMeshFlag.WriteDeformed |
| |
| | example_script.write_conditions = WriteConditionsFlag.WriteConditions |
| |
| | example_script.gid_io = GidIO(input_file_name,gid_mode,multifile,deformed_mesh_flag, write_conditions) |
| |
| | example_script.model_part_io_origin = ModelPartIO(input_file_name) |
| |
| | example_script.box_corner1 = Vector(3); |
| |
| | example_script.box_corner2 = Vector(3); |
| |
| float | example_script.dynamic_tau = 0.0 |
| |
| | example_script.fluid_solver = runge_kutta_frac_step_solver.RungeKuttaFracStepSolver(Qcomp_model_part,domain_size, box_corner1, box_corner2) |
| |
| | example_script.ReformDofAtEachIteration |
| |
| | example_script.pILUPrecond = ILU0Preconditioner() |
| |
| | example_script.pressure_linear_solver |
| |
| float | example_script.mesh_name = 0.0 |
| |
| int | example_script.out = 0 |
| | TIME. More...
|
| |
| int | example_script.time = 0 |
| |
| int | example_script.step = 0 |
| |
| float | example_script.output_step = 0.000001 |
| |
| float | example_script.next_output_time = output_step |
| |
| float | example_script.final_time = 1.0 |
| |
| | example_script.ulf_time_step_dec_process = UlfTimeStepDecProcess(Qcomp_model_part); |
| |
| string | example_script.outstring1 = "sensor_height.txt" |
| |
| | example_script.outputfile1 = open(outstring1, 'w') |
| |
| | example_script.out_file = outputfile1 |
| |
| float | example_script.Dt = 0.005 |
| |
| | example_script.res_name3 = str("free_surface_flow") |
| |
